Deploying an i.lon template, Deploy an i .lon template – Echelon Enterprise Services 2.0 User Manual
Page 43
![background image](/manuals/735733/43/background.png)
Echelon Enterprise Services 2.0 User’s Guide
33
network database>-<yyyy-mm-dd>-<template ID> folder, and is named lns_db\<LNS network
database>-<yyyy-mm-dd>-<template ID>.
If any other administrative task for a SmartServer in the selected project has not been completed or
has failed, a dialog opens prompting to confirm that you want to create the template.
Note: If the i.LON AdminServer reports “Backup/Restore Failed. Compression Failed -8” when
backing up an LNS network database that is associated with a LonMaker drawing, reboot your
computer and try to create the i.LON template again.
5. The Progress box displays the status of the template creation.
6. After the SmartServer templates have been created, the SmartServers are automatically rebooted.
When a SmartServer reboot has finished, STATUS_DONE is displayed in the Status box for that
SmartServer.
7. A template folder is added underneath the Templates icon. To view this folder, expand the
Templates icon. The name of the template is the name of the source project with “-TEMPLATE”
appended to it.
Deploying an i.LON Template
To deploy an i.LON template, perform the following steps:
1. If there is a LonMaker drawing associated with an LNS network database in the i.LON template,
verify that the LonMaker drawing is closed.
2. Right-click your template (for example, myDeployProject-TEMPLATE) and then select Deploy
on the shortcut menu.