Echelon Enterprise Services 2.0 - Manual (Page 48)

38 Using the i.LON AdminServer
15. A remote network interface (RNI) for each deployment SmartServer is automatically created in
the LonWorks Interfaces Control Panel application if the i.LON template included an LNS
network database. The name of the RNI is #EES#<deployment SmartServer IP address>.
16. If you are a deploying an i.LON template that includes an LNS network database and was
imported from a different LNS Server computer, and your LNS Server computer does not include
the source LNS network database, you can create a LonMaker drawing from the deployed LNS
network database as described in Manually Creating a LonMaker Drawing later in this section.
Manually Copying a LonMaker Drawing
If you are deploying an i.LON template that includes an LNS network database, there is a LonMaker
drawing associated with LNS network database, and you are deploying the i.LON template on the
same LNS Server computer that includes the source LNS network database, you need to manually
create the LonMaker drawing for the target LNS network database because it cannot be created
automatically.
You can use the LonMaker Design Manager to create the LonMaker drawing for the target LNS
network database from a copy of the source LNS network database in the i.LON template. For
example, if the i.LON template includes an LNS network database named QSR and the target LNS