Echelon i.LON 10 Ethernet Adapter - Manual (Page 81)

7. Configure the fields on the Address/Port tab. The following table describes
these fields.
Field Description
i.Lon is
listening on
port:
Default Value: 1628
Range: 1-65,535
Comments: Enter the TCP port number the i.LON 10
is using to listen for incoming connections from the LNS
server.
Use Static IP
Address
Comments: Click the Use Static IP Address button
to manually enter the IP address of the i.LON 10. You
must enter an IP address in the form x.x.x.x, where x is
an integer in the range 0-255.
You should use this option if your i.LON 10’s hostname
is not configured in any name servers (e.g. DNS servers,
HOSTS file).
Use Hostname Comments: Click the Use Hostname button to have
xDriver resolve the i.LON 10’s IP address from the
hostname and DNS suffix entered in the General tab.
When you have configured the fields on the Address/Port tab, click the
Authentication tab. This opens the tab shown in the following figure :
i.LON 10 Ethernet Adapter User’s Guide B-5