Echelon i.LON 10 Ethernet Adapter - Manual (Page 44)

Allow HTTP Access Set this option to allow users to access the
i.LON 10 web pages with the exception of the
Firmware Page and the Security Page (both of
which can only be accessed after a security
access reset). If set, enter a Username and
Password that will grant access. The
Username and Password may contain up to
16 alphanumeric characters; they are case
sensitive. By default, the Username and
Password are set to ilon. If this option is
not checked, you will not be able to view any
of the i.LON 10 web pages without performing
a security access reset. Performing a security
access reset resets the Username and
Password to ilon/ilon. This option is
enabled by default, but generally should be
disabled once the i.LON is placed in the field.
Allow TFTP Access Set this option to allow users to use TFTP to
load new firmware and user web pages (see
Uploading a User Web Page in Chapter 6). If
set, enter a Password that will grant access.
The Password may contain up to 16
alphanumeric characters; they are case
sensitive. Password is set to ilon by
default. Performing a security access reset
resets the Password to ilon. This option is
enabled by default, but generally should be
disabled once the i.LON is placed in the field.
Allow Access to this Page
Without Security Access
Reset (SAR)
Set this option to allow the Security,
Diagnostics, and Firmware Upload Web pages
to be opened without a security access reset
being performed. This option is enabled by
default for ease of set up.
It is strongly recommended that you
disable this option before placing the
i.LON 10 in the field.
Listen for Incoming LNS
Server Connections
Set this option to allow downlink connections
from external LNS Servers. By default, this
option is enabled.
Enable Ethernet
Connections Set this checkbox to allow the i.LON 10
Ethernet Adapter to accept Ethernet
connections. This option is enabled by default.
Note: If this option is enabled, the Allow and
Authenticate Incoming PPP Connections
option should be disabled. The i.LON 10 does
not support simultaneous Ethernet and PPP
connections.
Use PPP as Dial Backup
when Ethernet Link Fails
Set this checkbox to have the i.LON 10
Ethernet Adapter attempt to establish a dial-
5-4 i.LON 10 Ethernet Adapter Security