I.lon 10 hardware specifications, Fcc compliance statement – class b, I .lon 10 hardware specifications – Echelon i.LON 10 Ethernet Adapter User Manual
Page 17
Be sure the heads of screws are protruding slightly from the mounting
surface.
3. Slide the i.LON 10 Ethernet adapter onto the screws. You may need to
adjust the screws into or out of the wall slightly to assure a secure mounting.
i.LON 10 Hardware Specifications
Operating Input
Voltage
Power line: 12.5 VDC provided by L
ON
W
ORKS
enabled power supply such as Tamura model
#425x12400P
Free topology: 9VDC
Operating Input
Current
270 mA Model 72010
400 mA Model 72011
Operating
Temperature Range
0
° C to +50° C
Operating Humidity
Range
25 to 90% RH @ 50
° C
Non-operating
Humidity Range
95% RH max @ 50
° C
EMC
FCC Part 15 Class B, ICES-003 Class B, EN55024,
EN 55022 Class B, VCCI Class B, C-Tick
Agency Listings
UL 60950, CSA C22.2 No. 60950, EN60950, CE
FCC Compliance Statement – Class B
This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if no installed and used in accordance with the manufacturer’s
instruction manual, may cause interference with radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that which
the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
i.LON 10 Ethernet Adapter User’s Guide
2-7