Echelon i.LON 10 Ethernet Adapter - Manual (Page 13)

i.LON 10 Ethernet Adapter, PL model
These hardware inputs and outputs have the following function:
Power LED
Green LED that illuminates steadily while the
i.LON 10 Ethernet Adapter has power.
Ethernet Link LED Green LED that illuminates when the i.LON
10 Ethernet Adapter has established an
Ethernet link via the 10Base-T port.
Ethernet Transmit LED Green LED that flashes when traffic is
detected on the 10Base-T network.
L ON W ORKS Service LED Yellow LED that implements the Standard
Neuron® Service LED behavior (see the
Neuron Chip Databook for more information).
L
ON
W
ORKS
Connect LED Yellow LED that illuminates steadily if the
i.LON 10 Ethernet Adapter is connected with
an LNS server. It is dark when no LNS server
connection exists.
L ON W ORKS Wink LED Yellow LED that flashes 5 times when the
i.LON 10 Ethernet Adapter receives a
L ON W ORKS wink command from the
L ON W ORKS channel.
BIU LED Yellow LED that illuminates when a carrier
frequency is detected at 131.5 kHz to 133.5
kHz. This LED is only on the power-line
version.
Power Input Barrel connector power supply input for use
with the included power supply (Echelon
model 780x0 series for the free-topology
model). The included Tamura 425x12400P
i.LON 10 Ethernet Adapter User’s Guide 2-3