Echelon i.LON 10 Ethernet Adapter - Manual (Page 52)

Using the Microsoft
®
TFTP Client
You can use Microsoft’s TFTP client from a Windows command line to upload a
user web page. This can be done using the following format:
TFTP -i host PUT source password
The –i flag specifies binary image transfer mode, and should always be used
when uploading a user web page to the i.LON 10 Ethernet Adapter. For example,
to upload the file ETH0006.hex from c:\temp to an i.LON 10 with an IP address
of 192.168.1.222 and a password of ilon, you would issue the following
command:
C:\>tftp –i 192.168.1.222 PUT c:\Program Files\iLON 10
\iLON 10\Firmware\EethLONb20028.hex
6-4 Uploading i.LON 10 Network Adapter Firmware and the User Web Page