Echelon i.LON 10 Ethernet Adapter User Manual
Page 61
Message Description
Port #n: Session aborted with
LNS server
This message indicates that the current
LNS server shutdown abruptly without
first receiving a TERM command.
Port #n: sessionid/sequence
number invalid on incoming
Xdriver packet
This message indicates that the expected
sessionid
or sequence number does
not match the data in the incoming
Xdriver packet.
Port #n: could not write
Configuration data after
Xdriver INCAUTH command
This message indicates that the new
secret key and configuration were not
properly saved.
Port #n: Session to LNS
server closed since 10BaseT
connections are disabled
This message indicates that the recently-
established TCP session over Ethernet on
the LNS port has been closed since the
configuration disables 10BaseT
connections. This message is only
encountered when incoming LNS sessions
are permitted, but the 10BaseT interface
is not allowed to handle the session.
Port #1: Size of
authentication digest
incorrect
This message indicates that the unit
received an xDriver packet with
unsupported digest size from the LNS
server. This error can indicate that a
version 2.0 i.LON 10 is being used with a
version of LNS older than LNS 3 Service
Pack 8, Update 1.
This message should normally be followed
by a further log message indicating the
contents of an XDRIVER_ACK packet if
this is what caused the error.
DNS: primary server is
is "
This message indicates that the primary
server, secondary server, and default
domain have been defined with the given
values.
Note that the primary or secondary
entries are only listed if they have been
defined. The default domain will be given
even if empty ("").
DNS: unavailable (no server
information provided)"
This message indicates that no DNS
information has been entered into the
configuration of the unit.
DNS: "
exist (non-authoritative
answer)"
This message indicates that the DNS
server responded to the query but has no
entry for the given hostname. The DNS
server gave this response as a non-
i.LON 10 Ethernet Adapter User’s Guide
7-9