Echelon LonPoint Application and Plug-In - Manual (Page 20)

2-2 Digital Input Functional Block
The Digital Input Functional Block
The Digital Input functional block reads the state of a digital signal. This value
is then processed, and the resulting digital value is sent to the output network
variable. The following figure and table summarize the inputs and outputs of
the Digital Input functional block:
Output Network Variables
Default name Default type Description
Digital SNVT_switch The Digital output network
variable driven by the sensor.
Configuring the Digital Input with the LonPoint Plug-in
Right-click a Digital Input functional block and select Configure from the
shortcut menu to open the Digital Input window of the LonPoint Plug-in. You
can also choose Plug-ins from the shortcut menu and then select Configure
LonPoint Object
from the dialog box. The Digital Input functional block
window has two tabs, Digital Input and Status.