Echelon LonPoint Application and Plug-In - Manual (Page 191)

14-4 Node Object Functional Block
Unconfig Power up Time Length of time the service button must be pushed to
put the device in the unconfigured state at power-up.
The default is 10 seconds. Set this value to 0 to
disable the ability to put the device in the
unconfigured state by holding down the service pin at
power-up. The changes to this configuration property
do not take effect until after a device reset.
Status
This tab allows you to view and change the status of a Node Object functional
block. See Status in Chapter 2 for more information.