Echelon LonPoint Application and Plug-In - Manual (Page 138)

10-36 Scheduler Interface
module will function as expected. You will use the Simulate tab, shown in the
following figure, to interact with the simulator.
The Simulate tab shows a graphical representation of the data flow within the
SCH-10 application. The following sections describe how to use this tab to
simulate a design. This tab displays the following information:
Inputs Controls the simulated input values for the mode,
digital, and analog input network variables of the
State Machine functional block. The simulator
ignores any inputs to these fields until you have
clicked the Update Inputs button. See Simulating
Inputs later in this chapter for more information.
Date/Time Displays the simulated date, time, and day of the
week. You can skip ahead to the next event using the
Run Next Event button as described in Running to
the Next Event later in this chapter.
Event Scheduler Displays the status of the schedules defined in the
Edit Schedules tab.
The Last Time-based Event field displays the last
event sent from the event scheduler and the
Occurred at:
field displays the time at which the
event was sent.