Sears 385. 19601 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTSON 5. LEARN THE STITCHES
The machine will automatically
bartack and sew down the nghi
side.
Stop the machine when you are
directly opposite the first stitch
on the left hand side.
The machine will auio-lock the
end ot the buttonhole and stop.
Keep the toot control depressed
until the machine stops by itself.
• Stitch Density on One Side:
The stitches on each side ot the buttorthole should be the same stitch density.
To adjust, use the teed balance dial below the Hand Wheel.
For Condition B:
Right Side Stitches loo Far Apart
(see above)
Turn the teed balance dial slightly
tov/arti "
For Condition A:
Lett Side Stitches too Far Apart
(see above)
Turn the teed balance dial slightly
toward "“!■'* Use the targe screw
driver m your accessory box.
After adjusting the teed balance dial, sew another test buttonhole to be sure
your adjustment is correct.
NOTE: Remember to return the teed balance dial to the standard mark (
t
>)
when you have completed the buttonholes.
73