Measure – Sears 385. 19601 User Manual

Page 71

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Automatic Buttonholing

SECTION 5. LEARN THE STITCHES

The Kenmors 100 Stitch sews three

different types

buttonhole to meet

every sewing need. Ail three buttonholes

are made m the same way.

Automatic buttonhole foot will gauge the

buttonhole length.

Selorc you sew buttonholes on the actual

garment, make several practice button

holes.

highest position.

b. Raise the presser toot.
c. Remove the toot holder.
d.

Attach the automatic buttonhole

loot by lightening the foot holder

screw.

c. Lower the presser toot.
d. Open the button holder by pulling

back as shown above.

e. Place the button you intend to use on the button holder oi the

automatic buttonhole foot N.

t. Press the back ot the holder towards you to secure the button.

NOTE: If the thickness ot button is more than 0.4 cm {3/16"),

measure thickness and diameter and set the button holder as

shown.

EXAMPLE:

If the button ¡s 2 cm (3M") m diameter and 0.5 cm

{3/16'T in thickness, set the measure 2.5 cm 131/32").

''Measure

2.6 cm C31/32")