Sears 385. 19601 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 4, PRACTICE COMMON STITCHING SKILLS

Sew a Button

Use the darning plate lor button sewing {see p. 35|.

■{, Match the button holes to the horizontal slot

on the presser toot.

2. Lower the toot to hold the button in place.

2. Turn the hand wheel fay hand until the needle

point IS just above the button.

Press the stitch width button 1+ or —I so the

needle will enter the left bole oi the button.

Turn the hand wheel so the needle will enter

the right hole ot the button. Beadlust the
stitch width ii necessary.

Stitch several times.

After you finish sewing, cut the thread but
leave 3 to 4 inches oi thread at the button.

Draw the thread to the reverse side ot the

fabric and knot the threads.