Sears 385. 19601 - Manual (Page 42)

SECTION 4 . PRACTICE COMMON STITCHING SKILLS
Put in 8 Zipper (Continued)
■j. Fold back ihe lett seam allowance as
shown.
2. Tam under the right seam allowance to
form a 1/8" fold.
3. Place the zipper teeth next to the 1/8"
told and pin in place.
NOTE: 8e sure the top ot the zipper (the
slider} is at the top ot the garment.
Lower the zipper toot on the top side
at the bottom ot the zipper so that the
needle pierces the fold and the zipper
tape.
Sew through the fofd and tite zipper
tape to the porn! where the slider begins.
Lower the needle to hold the fabric and
raise the presser tool.
Lower the presser foot and stitch the
rest of the seam.
40