Sears 385. 19601 User Manual

Page 74

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 5. LEARN THE STITCHES

Manual Buttonholing

NOTE:

Do not put finger, screw driyer or
any other object near under the
sensor when sewing buttonholes by
using sliding buttonhole foot J,
otherwise the sewmg procedure m
the pattern indicator may advance

to the next slap.

(D a

b. Change to the sliding buttonhole foot.

c. Insert the garment under the foot with

the buttonhole marking running toward
you.
Slide both threads to the left.

Move the sJider (Aj away from you so
that the bottom mark fC} on the slider
meets the start mark {Bj.

b. Line up the markings on the foot with

the bottom mark on your garment.

c. Lower the presser fool and press BH 1

(bar-tack) button.

NOTE: The markings on the slider are engraved

m centimeters.

(3) The machine will automatically banack and

sew up the left side of the buttonhole.

Stop the machine at the top mark.