Sears 385. 19601 User Manual

Page 70

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 5. LEARN THE STITCHES

Automatic Darning |29j (Continued)

' Darning Small Rips

® Adjusting Evenness of Darning

Small nps can be repaired by pro
gramming the machine to sew a

shorter darn.

Begin the first row ot the darn

stopping the machine when you reach
the bottom edge of the rip. For
example, you may only need to sew 5
stitches. Press the reverse button but
do not hold it. The machine will now
complete the 16 rows with 5 stitches
in each row and stop automatically.

It IS simple to make a claming of same

sixe as the first one.

Press memory button when you have

completed the first darning, and
depress the tool control. Then the
second darning is auiomaiicaJly made.

Pressing mirror image button instead

of memory button will give the same
result hut the darning is made m the
reverse sequence.

When the left side is

lower, turn the feed

balance dial lo

When the right side is

lower, turn the feed

balance dial to

^ After darning, return

setting mark