Sears 385. 19601 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Prepare the Bobbin (Continued)
« insert the Bobbin into the Bobbin Holder
SECTtON 2, PREPARE YOUR MACHINE FOR SEWING
(T) Put the bobbin into the bobbin
holder 50 ihoi the thread feeds
coufiler-clockwise.
Pull about 4 inches ot thread (3) Then pull the thread clockwise 0) Slide the bobbin cover plate while
toward you through the tension
slot 0 .
toward the back the machine
through the slot@ .
pushing
It
down slightly over the
bobbin. Allow about 4 inches ot
thread to show above the needle
plate.
Bobbin threading chart is located
behind the tace cover plate.
20