Top tension too loose just right – Sears 385. 19601 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Prepare Your Top Thread ¡Continued)
0 Adjust the Top Tfireacf Tension {Continued)
For Zigzag Stitch
In the
correct
zigzag stitch, the bobbin threads wjH not show on the top side
01 isbnc and the top threads will show sJIghtiy on the boitom side. See
befow tor the correct appearance. To match this appearance, adjust your top
tension.
SECTtOisi 2. PREPARE YOUR MACHINE FOR SEM/ING .
Top tension
Too Tight
Top tension
Too Loose
Just Right
Too Tiglu:
Comer of each nojsawill
pull loy-jfher on !he top
side of fabrics.
The top thread wiU loop
Through
boiiorn
side
of
labnc and will bo pulled
almost losether,
Jus! Right:
Minimize
the
omount
of
top
Thread visible on the bemprn
sida ol fabric without causing
excessive puckering Qf causing
the bobbin ihfead lo show on
the
top
side.
Results
vary
with labrrc, threiKi and sawing
conditions.
24