Sears 385. 19601 - Manual (Page 35)

SECTION 3. LEARN TO USE THE CONTROLS
o Stitch Length Button
This button sets the stitch length lor both straight and zigzag stitches,
When you press the ststch length button, the stitch length light wilt go on and
the indicator screen will show the pre*set stitch length:
"2.0" for straight stitching
— "1.5" for zigzag stitching
NOTE: The range ot stitch length depends on the stitch pattern you select.
To Decrease the Stitch Length:
Press the button.
The stitch length will decrease
---- by 0.1 mm from "1.0" down to "0.0"
—- by 0.5 mm from "4.5" down to "1.0"
Press the button.
The stitch length will Increase
---- by 0.1 mm from "0.0" up to "1.0"
---- by 0.5 mm from "1.0" up to "4,5"
To Adjust the Stitch Length Quickly:
Hold Down the "4" or button until you reach the desired length.
To Return to the Preset Stitch Lengtlt
tor dear the smch length settingK press the Stitch Length button again
(or press the Clear button}. The stitch length light and the indicator screen
will go off.
33