Lf3c6 v)/ork, Multiple zigzag stitch – Sears 385.12912 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lf3C6 V)/ork
© stitch selector:
5
© Stitch length:
1 to 3
© Needle thread tension: 1 to 4
© Presserfoot;
Zigzag foot
Lace adds a fanciful, feminine touch to blouses and
lingerie. Table linens and pillows become more
elegant when trimmed with lace
Fold raw edge of fabric at least 1,5 cm (5/8”), Place
lace underneath and topstitch with blind hem stitch
Trim excess fabric dose to stitching
Multiple Zigzag Stitch
© stitch selector:
4
© Stitch length:
0,5 to 1
© Needle thread tension: 1 to 4
@ Presserfoot:
Zigzag foot
This is used to finish seam allowance on synthetics and
other fabrics that tend to pucker The stitch is also excellent
for darning and mending tears,
Q]
Seam finishing
Place fabric under the presser foot in such a manner that
the edge is slightly Inside the right-hand side of the presser
foot, Guide the fabric so that the right hand stitches fall at
the edge of the fabric,
[2] Mending
Position tear under the needle so that the stitch catches
both sides
v_
r
PATTERN
LENGTH
PATTERN
LENGTH
48