Setting spool pins, Presser foot lifter, Thread cutter – Sears 385.12912 User Manual
Page 16: Accessory box, Thread cutter— accessory box
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Spool Pins
0) Spool pin
The spool pins are used for holding the spools of
thread when feeding thread to the machirie
To use, putì up the spool pins. Push down for storage.
Presser Foot Lifter
® Presser foot lifter
@ Normal up position
(D Highest position
The presser foot lifter raises and lowers your presser foot.
You can raise it about 0.6 cm (1/4") higher than the
norma! up position for easy removal of the presser foot
or to help you place heavy fabric under the foot.
Thread Cutter
© Thread cutter
You do not need a pair of scissors to cut threads after
sewing. Just use the built-in thread cutter
Accessory Box
Open the cover of the accessory box toward you. Sewing
accessories are conveniently located in the box.