Sears 385.12912 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bobbin Winding
« Removing bobbin case
Remove the extension table from the machine by pulling it to
the left Open the shuttle cover
(D
by pulling down the em
bossed part on the ieft of the cover
Raise the needle to its highest position by rotating the
handwheel toward you
® Shuttle cover
d) Bobbin case
To remove the bobbin case® from the shuttle, puli open the
latch of the bobbin case Pull the bobbin case straight out of
the shuttle
«> Bobbin winding
ITl Release the clutch by pulling out the handwheel. This
will slop the needle from moving while you win'd the bob
bin.
[U Draw thread from spool,
d] Guide the thread around the thread guide,
^
[3 Thread through the hole in the bobbin from the inside to
the outside,
[
1
]
Put the bobbin on the bobbin winder spindle
18