To drop or raise the feed dogs, Darning, To drop or raise the feed dogs ...— darning – Sears 385.12912 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Drop or Raise the Feed Dogs
0 To drop the feed dogs, press the iever in the direction of
the arrow as iliustrated,
0 To raise the feed dogs, push the lever in the direction of
the arrow as iilustrated.
Feed dogs must be up for norma! sewing.
Darning
0
stitch
selector;
1 or 2
0
Stitch length:
Any
®
Needle thread tension: 1 to 4
0
Presser foot:
Removed
(D Feed dog:
Dropped
Drop the feed dogs (see above) and remove presser foot.
Place fabric,with the hole in the center, on an embroidery
hoop. Lower the presser bar and sew at slow speed.
Move the fabric back and forth slowly until the darning area
is covered. Turn the fabric a 1/4 turn (90“) and sew another
layer of stitching over the first layer,
NOTE: If fabric is thin or badly damaged, use a
separate piece of fabric under the hole to
reinforce it.
38