YSI BODAnalyst User Manual
Page 18
Sample groups
Section 4
YSI Incorporated
BOD Analyst for Windows Software
14
NOTE: The dilution blank sample is automatically added when you build a batch. Therefore,
you do not need to add the dilution blank sample to any group.
4.4 CHOOSING SAMPLES FOR GROUPS
The Choose Samples list displays all available samples. The Samples in Group list displays the
samples that are in the Group. Use the transfer buttons described below to add or remove
samples from the Group.
Transfer all selected samples from the Choose Samples list to the Samples in
Group list.
Transfers all samples from the Choose Samples list to the Samples In Group
list.
Removes all selected samples from the Samples in Group list
Removes all samples from the Samples in Group list.
4.5 EDITING A GROUP
Use the button bar to move to the Group that you want to edit. Change the Samples in Group
list as required. The Group name can also be changed at anytime with no effect on historical
data. Changes are automatically saved.
4.6 DELETING A GROUP
Use the button bar to move to the Group that you want to delete. Click the [Delete]
button. You will be asked if you are sure, click Yes to delete the group.