beautypg.com

Voip setup fields – Carrier Access CMG Router User Manual

Page 81

background image

CMG Router - Release 2.7

3-43

Profile Directory:Router Card Profile

Voice Channels

VoIP Setup Fields

Start Channel

- Set the starting channel of which to apply the following voice channel

configuration to. Range is 1 to 48, default is 1. Start channel must be less than or equal to the end
channel.

End Channel

- Set the last channel of which to apply the following voice channel configuration

to. Range is 1 to 48. Note: End channel must be equal to or greater than the start channel.

Channel Status

- Puts the channel In-Service or Out-of-Service.

- Brings the channel back into service. This will cause an RSIP message to be sent to the
call agent, with the "restart" value for the Restart Method parameter.

- Puts the channel Out-of-Service. Once channel is out-of-service, the call agent cannot
access the endpoint IP associated with the voice channel.

Event Log

- Sets the parameters of the log.

- Event log is set to not log errors.
- Event log is set to record protocol and other errors only.
- Event log is set to record MGCP protocol events.
- Event log is set to record MGCP protocol events and errors.

Endpoint Prefix

-

Defines the common part of the MGCP endpoint name for a voice channel.

The default prefix is "aaln". The Endpoint Prefix is a text string with 1 to 16 characters.

Endpoint Suffix

- Defines the variable part of the MGCP endpoint name for a voice channel. The

default suffix is the voice channel number. The Endpoint Suffix is a text string with 1 to 16
characters.

Receive Gain (dB)

- Defines the gain on the receive side (packet-to-TDM) voice path for the

specified voice channel. The default gain is 0 dB.

Transmit Gain (dB)

- Defines the gain on the transmit side (TDM-to-packet) voice path for the

specified voice channel. The default gain is 0 dB.

Silence Suppression

- Enables or disables silence suppression as the default for voice calls for

one or more voice channels.
- Do not use silence suppression unless overridden by the call agent.
- Use silence suppression if possible, with no override by the call agent.