Lan port tests fields – Carrier Access CMG Router User Manual

Page 189

CMG Router - Release 2.7

7-3

Verification

Window

Ping Utility

2. Press [E

NTER

]. The LAN Port Verification window will display.

3. To initiate a Ping, select START PING , scroll to

and select [E

NTER

]. The Ping process will begin.

LAN Port Tests Fields

Dst Host

Destination Host. The Destination Address of the host to be tested.

Access Port

This is the local or remote profile of the network used during the test. The operator can scroll
(with the

PACEBAR

]

) through the selections of the Access Port: to select the

Local LAN or any of the defined Remote Unit(s). All defined Remote Profiles will be in this
selection.

Src IP Address

Source IP Address. This is one of the multiple IP addresses assigned to the Ethernet LAN port
and will override the IP address that will be used as the source IP address. Default is to use the
IP address of the interface from which the ping is sent.

Payload

This optional parameter sets the number of bytes to send in the ICMP echo request payload.
Range is 0 - 8000, default is 56.