Carrier Access CMG Router - Manual (Page 165)

CMG Router - Release 2.7 5-33
Profile Directory:Remote Profile
Filter Network/Server
Filter Network/Server
This screen allows you to filter the Remote (WAN) networks/servers in two ways,
depending on which mode is selected. The mode causes the unit to learn all
networks/services on known networks, and then advertise these services to the LAN.
In the mode the unit will disable or restrict learning of networks/services.
Under this mode, services will only be learned if they are selected or added. For
example, when you enter the current screen, all known networks/services will be
displayed, since the mode is the default mode. If you wish to restrict which
services are learned you may change the Selected Items field to and then
enable only selected services displayed on the screen. Once you exit this screen and
save the changes, only those services that you enabled and/or added will be learned and
displayed.
Since the mode learns all services, it may be most appropriate for smaller
networks. The <Learn> mode however, may be best for larger networks since it allows
you to restrict which types of services are learned.
1. On the Main Menu, press [T AB ] until Configuration is
highlighted, and press [E NTER ].
2. Select WAN on the RemoteUnit line and press [E
NTER
].
Profile
Directory
Window