Security setup menu fields – Carrier Access CMG Router User Manual
Page 47
CMG Router - Release 2.7
3-9
Profile Directory:Router Card Profile
Security
Security Setup Menu Fields
Authentication by Remote
Protocol: CHAP, PAP or NONE
Use this first field to identify the authentication protocol to be used by remote units when
authenticating this unit.
Select
[E
NTER
]
and a NEW Password dialog box will display. Enter a 1 - 15 character
password and select
[E
NTER
]
and a RETYPE Password dialog box will display. Retype
password and select
[E
NTER
]
. Password is now set.
Same as above
User ID
Use this field to define the local unit’s User ID. During the authentication process, the local unit will
send a name or User ID, along with the authentication protocol’s secret or password (see above). Use
the
[S
PACEBAR
] to scroll between <Local Profile Name> (the default value) and <Local Custom
Name>. If set at <Local Profile Name>, the local unit will send the 11 character unit name which
was defined on the Local (LAN) Profile screen. If this field is set to <Local Custom Name> you may
define a 32 character maximum alphanumeric value to represent the User ID which is sent during the
authentication process. Defining a custom User ID simply gives the end user more flexibility for this
value.
To assign a custom User ID, set the USER ID field to <Local Custom Name> and press [
T
AB
]. Up
to ten (10) custom names may be configured.