Carrier Access CMG Router - Manual (Page 45)

CMG Router - Release 2.7 3-7
Profile Directory:Router Card Profile
Trunk
WAN Connection Type
Determines the type of protocol encapsulation that will be used for the selected WAN.
PPP
Point-to-Point Protocol. Provides a standard means of encapsulating data packets sent over a
single-channel WAN link. PPP is the standard WAN encapsulation protocol for the inter-
operability of bridges and routers.
PPP in Frame Relay
Point-to-Point Protocol encapsulated in Frame Relay.
Frame Relay 1490
A packet-switching protocol for connecting devices on a WAN. Frame Relay networks in the U.S.
support data transfer rates at T1 (1.544 Mbps) and T3 (45 Mbps) speeds. Frame Relay service is
provided for customers who want connections at 56 Kbps to T1 speeds.
PVC Management
Multilink Group
NOTE: Field displays only if is selected for the WAN Connection Type.
The Multilink Group will specify a trunk as part of a multilink PPP group. Selection is:
or <1> through <24>. Available on when PPP connection type is selected.
Data Speed
The Data Speed will specify the data speed for each DS0 in the given trunk. Selection is: <56K>
or <64K>. Default is 64K.
Voice BW Limit %
Defines the maximum percentage of bandwidth allowed on this trunk for voice calls. The
remaining percentage to be reserved for routed or bridged data. Routed or bridged data is
allowed to use any available bandwidth, but it is a lower priority than voice. Range is 0 - 100.
Field Description
Disabled Disables the PVC (Permanent Virtual Circuit) management.
Annex D Frame Relay standard
Poll Interval - Range is between 5-30
Poll Counter - Range is between 1-255
LMI Local Management Interface
Poll Interval - Range is between 5-30
Poll Counter - Range is between 1-255