Carrier Access CMG Router User Manual
Page 29
CMG Router - Release 2.7
2-7
Management
Window
System Time/Login
When Telneting into the Router the following will appear:
> telnet 1
Connected.
Escape character is '^]'.
1. Type the Enhanced Security Password here. Note: there will be no effect to the
screen here until the correct password is typed in. When the correct password
is typed, no return or other keystroke is needed, the following will appear:
Password >
NOTE: If Enhanced Security is enabled, and the Administrator does not note
the password there is no way to access the Router until you have reset the
router back to it’s default settings, losing all configuration settings. See set
[router_card-addr} default.
2. At this point the Router is requesting your Level 1, 2 or 3 User Password. Enter
your password and select [E
NTER
] and continue as you would Telnet into the
Router as normal.
Password >******
Select a terminal type...
(
Terminal: