Reznor VR Unit Installation Manual - Manual (Page 47)

Form I-VR, P/N 205202 R13, Page 46
Model VR/GVR Configuration Drawings ..................... Form T-VR-CNFG
Replacement Parts ...........................................................Form P-VR/RIH REFERENCES
(Forms are available on
Website www.RezSpec.com
or from your Distributor.)
Addendum
(cont’d)
Model VR/GVR Technical Information
Model VR (std 60 Hertz)
Voltage/Phase
Standard 115/1; Optional 208/1, 230/1
Frequency 60 hertz
Control Amps (24V) 0.8
Main Burner Ignition Direct Spark
Full Load Amps
Sizes 50, 75,
and 100
Sizes 125
and 150
Size 175 Size 200
115V 1.1 0.8 1.2 1.2
Optional 208V or 230V 0.5 0.5 0.6 N/A
Maximum Overcurrent
Protection
15 15 15 15
BTUH Input Gas Type
Supply Pressure
Minimum Maximum
50,000 - 150,000
Natural
Gas
4.5” w.c. 14” w.c.
175,000 - 200,000 6” w.c. 14” w.c.
50,000 - 200,000 Propane 11” w.c. 14” w.c.
BTUH Input Minimum Length Maximum Length
50,000 20 feet (6.1M) 40 feet (12.2M)
75,000 20 feet (6.1M) 40 feet (12.2M)
100,000 30 feet (9.1M) 50 feet (15.2M)
125,000 30 feet (9.1M) 60 feet (18.3M)
150,000 40 feet (12.2M) 60 feet (18.3M)
175,000 40 feet (12.2M) 70 feet (21.3M)
200,000 50 feet (15.2M) 70 feet (21.3M)
Gas Type and Supply
Gas Pressure
Electrical
Characteristics
BTUH/Length/
Configurations
Model VR (optional 50 Hertz) and Model GVR (std 50 Hertz)
Voltage/Phase
220-240/1 (Option AK11)
Frequency 50 hertz
Control Amps (24V) 0.8
Main Burner Ignition Direct Spark
Full Load Amps
Sizes 50, 75,
and 100
Sizes 125
and 150
Size 175
Optional 220-240/1/50 0.5 0.5 0.6
Maximum Overcurrent
Protection
15 15 15