Candle KLVHSKONCT GC32-9172-00 - Manual (Page 401)

KMQxx001E–KOCJ0046 401
KN3ND023 $PAM($PAM_name) FAILED ROUTINE=KN3AGSRC DDNAME=ddname
MEMBER=member_name R15=register_value R0=register_value
R1=register_value
Explanation: The specified CT/Engine $PAM (PDS services) function failed
accessing the specified member.
System Action: None.
User Response: None.
Message Type:
Warning.
KN3ND024 FAILURE OPENING DDNAME(ddname) FOR MVS LOAD
ROUTINE=KN3AGLOD
Explanation: The specified ddname could not be opened for an MVS load.
System Action: See previously issued messages.
User Response: None.
Message Type:
User error.
KN3ND025 FAILURE DELETING MODULE(module_name)
Explanation: The specified module could not be deleted from MVS storage.
System Action: None.
User Response: None.
Message Type:
Warning.
KN3ND026 FAILURE LOADING MODULE(module_name) ROUTINE=KN3AGLOD
SYSTEM CODE=system_code REASON CODE=reason_code
Explanation: The specified module could not be loaded into MVS storage. The
accompanying system and reason codes are provided.
System Action: See previously issued messages.
User Response: None.
Message Type:
User error.
KN3ND027 NETWORK TOPOLOGY ERROR LOADING OR READING RRT
(RRT_name)
Explanation: The specified RRT could not be loaded or read. The
corresponding NCP topology could not be built.
System Action: None.
User Response: Verify that a valid RRT by the specified name is pointed to by
ddname
KN3RRT.
Message Type: User error.
KN3ND028 NETWORK TOPOLOGY ERROR NPALU NAME MISMATCH IN RRT
(RRT_name) FOR NPALU(npalu_name)
Explanation: The specified RRT did not contain the correct NPALU name for
the indicated NPALU.
System Action: None.
User Response: Verify that the correct RRT is available to the NPALU
collector.
Message Type:
User error.