Candle KLVHSKONCT GC32-9172-00 - Manual (Page 383)

KMQxx001E–KOCJ0046 383
KN3FT208 CSVDYNEX ADD FOR (ssssss)(jobname) (xxxx) FAILED RC=yyyy,
REASON=zzzz
Explanation: Error adding SMF exit ssssss.
® jobname is the name of the FTP agent address space
® xxxx is address of exit in CSA
® yyyy and zzzz are error codes from CSVDYNDEX
System Action: Processing terminates.
User Response: Contact Candle Support Services.
KN3FT209 NO CSA TO FREE
Explanation: During agent shutdown, no CSA needed to be freed.
System Action: Processing continues.
User Response: None.
KN3FT210 ERROR FREEING CSA
Explanation: During agent shutdown, an error occurred freeing CSA.
System Action: Processing terminates.
User Response: Contact Candle Support Services.
KN3FT211 ERROR RE-LOADING LLLLLL
Explanation: This should never occur. Message KN3FT203 should occur
instead.
System Action: Processing continues.
User Response: Contact Candle Support Services.
KN3FT212 OBTAINING nnn BYTES OF CSA
Explanation: nnn bytes of CSA are obtained during initialization.
System Action: Processing continues.
User Response: None.
KN3FT213 ERROR OBTAINING CSA
Explanation: Unable to obtain CSA.
System Action: Processing terminates.
User Response: Ensure enough CSA is available (see message KN3FT312).
KN3FT214 CSA @xxxx OBTAINED
Explanation: CSA described in message KN3FT212 was obtained at location
xxxx
.
System Action: Processing continues.
User Response: None.
KN3FT215 RECOVERING FROM ALREADY ADDED EXIT
Explanation: An SMF exit for this job was found to be already added. The
existing exit is deleted and a new one is added. Note: this occurs on restart after
the FTP agent is cancelled instead of stopped.
System Action: Processing continues.
User Response: Always stop the FTP agent. Do not cancel it.