beautypg.com

Candle KLVHSKONCT GC32-9172-00 User Manual

Page 244

background image

244

Candle Products Messages Manual (KLVHS–KONCT)

KMQCI303I

MQ MANAGER (manager_name) IN SET(manager_name_mask) IS
MONITORED

Explanation: This message is issued in response to the DISPLAY SETTINGS
command.
System Action: None.
User Response: None. This is an informational message only.

KMQCI304I

QUEUE SET(queue_name_mask) TYPES(queue_types) IS ESTABLISHED

Explanation: This message is issued in response to the DISPLAY SETTINGS
command and displays information from the previously issued SET QUEUE
command. Queue types can be any combination of the following: PREDEFINED,
PERMDYN, TEMPDYN or ALL.
System Action: None.
User Response: None. This is an informational message only.

KMQCI305I

QUEUE SET(queue_name_mask) TYPES(queue_types) IS SUPERSEDED

Explanation: This message is issued in response to the DISPLAY SETTINGS
command and displays information from the previously issued SET QUEUE
command. The specified queue_name_mask was superseded by another
queue_name_mask

. Queue types can be any combination of the following:

PREDEFINED, PERMDYN, TEMPDYN or ALL.
System Action: This mask is not executed.
User Response: None. This is an informational message only.

KMQCI306I

CHANNEL SET(channel_name_mask) IS ESTABLISHED

Explanation: This message is issued in response to the DISPLAY SETTINGS
command and displays information from the previously issued SET CHANNEL
command.
System Action: None.
User Response: None. This is an informational message only.

KMQCI307I

MSGACCESS(parm) ICYCLE(interval_cycle) HLQ(high_level_qualifier)

Explanation: This message is issued in response to the DISPLAY SETTINGS
command and displays supplemental information from previously issued SET
commands such as SET GROUP, SET MANAGER, or SET RMANAGER.
System Action: None.
User Response: None. This is an informational message only.

KMQCI308I

RMANAGER SET(manager_name_mask) IS ESTABLISHED WITH
FOLLOWING SPECIFICATIONS: GROUP(group_name)
EVENTS(REMOVE|BROWSE|NO) ACTIVE(YES|NO)
REMOTEQ(remote_queue_name) AGGRHIST(aggregation_samples)
RETAINHIST(historical_aggregation_value)

Explanation: This message is issued in response to the DISPLAY SETTINGS
command, displays information from the previously issued SET RMANAGER
command, and displays information about remote manager settings.
System Action: None.
User Response: None. This is an informational message only.