Crooked pin, Straight pin, Hooking – Philips CCX134AT User Manual
Page 7: The tvivcr (confd)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hooking
up
The TVIVCR (confd)
7
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Deta/te
are on page 3S.
Use an Audio cable to connect the AUDIO
Use aVideo cable to connect theVlDEO OUT Jack on the
VCR to the VIDEO Jack on the front of the TV/VCR.
Plug in the TV/VCR,
Before you turn on the TV/VCR, go to page eight.
Helpful Hints
Before connecting the rod antenna or coaxial cable to theANT(enna) Jack, make sure the pin is not bent If the
pin is ben% straighten it as illustrated, then connect it to the ANT(enna) jack.
A rod antenna (not supplied) is available from Philips Service Company.The part number is 4835 3033 7006.
To order, call 1-800-851-8885.
Audio and video cables are not supplied.
Crooked Pin
Straight Pin