With, The tv/vcr must be off for, Timer recording to take place! make sure there – Philips CCX134AT User Manual
Page 43: Tape in thetv/vcr, Is a, Timer recording, The vcr plus* programming system (cont’d) 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Timer Recording
With
the VCR Plus* Programming System (cont’d) 43
4
}
Press the Number I button to record in SP speed, the
Number 2 button to record in LP speed, or the Number 3
button to record in SLP speed. Your selection will appear to
the right of REC SPEED on-screen, although SP= I LP=2 SLP=3 will
continue to flash. For details about tape speed, see pages 33 and
SS.You cannot use the (Tape) SPEED button at this time.
ONETIME PaOGRAM
paOGRAM
CHANNEL
TIME
ON
TIME
OFF
ElEC SPEED
I
09
lOJOPM
iiaopM
SIP
sp3| ap33
START DATE
10110/97
FRIDAY
TO END PRESS EXfT
Press the STATUS/EXIT button. PROGRAM WAS COM
PLETED / PLEASETURN OFF FORTIMER RECORDING will
appear on-screen.
o If there is not a tape in theTV/VCR, PLEASE INSERT CASSETTE
also appears on-screen.
o If there is a tape without a record tab in theTVWCR, PLEASE
REMOVE CASSETTE also appears on-screen. If this happens,
insert a different tape.
5.
Turn off theTVA^CR power. The REC(ord) light will flash. If you
forget to turn off theTV/VCR, PLEASETURN OFF FORTIMER
RECORDING appears on theTV/VCR screen two minutes before
a timer recording starts.
Helpful Hints
The TV/VCR must be off for
a
timer recording to take
place! Make sure there
is a
tape in theTV/VCR.
To exit the VCR Plus+ programming
system at any time, press the STA
TUS/EXIT button Jhe display will
disappear from the
screen.
» To stop
a started timer
recording,
press the STOP/EJECT button on
theTV/VCR.