Philips CCX134AT - Manual (Page 52)

52
Index Search
This feature allows you to index the starting points of programs
that you have recorded on a tape.Then, you can easily rewind or
fast forward to that point.
Example:
If you are watching program number 4 and you want to fast for­
ward to program number
7,
skip three programs.
CURRENT PLAYBACK PROGRAM
Beginning of tape
1
End of tape
Pro. 1 Pro. 2 Pro.3 Pro. 4 Pro. 5 Pro. 6 Pro. 7
► 4 3
INDEX MARK
i 1
Press the COMBI button, then the INDEX SEARCH but­
ton to bring up the Index search display. There must be a tape in
theTV/VCR.
INDEX SEARCH
00
ENTER INDEX NUMBER
Within 10 seconds, use the Number buttons to enter the
number of programs that you want to skip. For example, to
skip three programs, press Number buttons 0,3. If you do not
make an entry within 10 seconds, theTVA^CR will exit Index
Search mode.
Within 10 seconds, press the Fast Forward/Search/-> but­
ton or the Rewind/Search/- button to skip forward or
backward. The TVA^CR will fiast forward or rewind to the begin­
ning of the desired program, then begin playback. (The program
numbers count down on-screen as the searching progresses.To
remove the on-screen counter, press the INDEX SEARCH button
once.)
HelpfuS Hints
* Every time an index mark is
skipped, the number of programs
decreases by one.
"
Up to 20 index marks may be
searched.
» This /iinctfon will not operate in
recording mode.
» Press the STOP button to stop the
search.
“ An index mark will be made auto­
matically when the REC(ord)/OTR
button is pressed, or at the begin­
ning of a Timer Recording or OTR.
“ T h e index mark is not made if the
PAUSE/STILL button is pressed and
released during recording.
“
The time
gap
betv/een index mor/cs
shou/d
be greater than I minute for
SP
recording, 2
minutes
for LP
recording, and 3 minutes f)r SUP
recording.