Philips CCX134AT - Manual (Page 45)

Setting the Sleep Timer 45
Use the sleep timer to program the TV/VCR to shut oif in a cer­
tain amount of time.
Press the COMBI button, then the SLEEP button. The
sleep timer display will appear on-screen. (You can not set the
sleep timer during a recording.)
SLEEP 0 MIN
Within five seconds, press the SLEEP button repeatedly
to select 30 minutes, 60 minutes, 90 minutes, or 120 min­
utes. In a few seconds, the display will disap pear. Then the TV/VCR
will shut itself off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on-screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds before
the TV/VCR shuts itself off.
SLEEP 10 SEC
GOOD NIGHT
To see how much time remains until the TV/VCR shuts itself off,
press the SLEEP button once.The time remaining will appear on­
screen briefly.You cannot do this during a recording.
To cancel a sleep timer setting, press the SLEEP button until 0
MIN appears on-screen.The on-screen display will disappear in a
few seconds.You cannot cancel it during a recording.
Helpful Hints
“ You can start a recording after the
sleep timer is set If the recording
finishes before the JVIVCR shuts
itself off, the TV/VCR will shut itself
off as programmed with the sleep
timer. If a recording is in progress,
the TV/VCR will not shut itself off
until recording
stops.
• A timer recording will not begin until
the TV/VCR is off.Two minutes
before a timer recording starts,
PLEASE TURN OFF FOR T//MER
RECORDING floshes on-screen.
If
you see this message, turn off the
TV/VCR.
“ If the power fails, you might lose the
sleep timer setting.