20 setting, Remote, Operate a cable box/digital satellite system – Philips CCX134AT User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
20 Setting
the
Remote
to
Operate a Cable Box/Digital Satellite System
YourTVA^CR remote control may operate your Cable Box or
Digital Satellite System. If
the
remote control doesn’t operate your
Cable Box or Satellite System now, follow the steps below to pro
gram your remote control.
Turn on your Cable Box or Satellite System. Point the remote con
trol at your Cable Box or Satellite System and press the
CABLE/DSS button.Then, press the POWER button. If
your Cable Box or Satellite System turns off, try the other Cable
Box/Satellite System buttons (see pages 24 - 25 for details). If your
Cable Box or Satellite System doesn’t turn off, or if the other but
tons don’t work, go to step 2.
Find the brand of your Cable Box or Satellite System on
the list below and remember the two-digit number to the
right of it.
CABLE BOX CODES
HAMLIN...................... 21,22
PIONEER ................11,12
JERROLD , .01, 02, 03.
SCIENTIFIC
.............. 04, 05, 06. 07 ATLANTA . . .08, 09. 10
OAK................ 16, 17, 18 TOCOM . .. .23, 24, 25
PANASONIC
. . . 1 9 , 2 0
ZENITH______ 1 3 , 1 4 , 1 5
SATELLITE SYSTEM CODES
MAGNAVOX_______26, 27
RCA ............................. 28
Find your Cable Box/Satellite
System code.
Press and release the MUTE button.
4
Within 30 seconds after releasing the MUTE button, press and
release the CABLE/DSS button.