Remote locator 29, If another remote control beeps – Philips CCX134AT User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Locator 29
YourTV/VCR can ftncj your remote control for you.
When you press the POWER button on the TV/VCR to turn on
the TVA^CR, your remote control beeps and LOCATING
REMOTE appears on-screen. The remote control will beep for
about 30 seconds. Or, press any button on the remote control to
stop the beeping.
If another remote control beeps...
TheTVA^CR may find other remote controls. If this occurs, you
can program the TV/VCR to find only its remote control. Follow
the steps below.
Press the COMBI button, then the MENU button.
Press the Play/A button or the Stop/V button to select
PRIM, SETUP. Press the Fast Forward/Search/+ button.
Press the Number 7 button to select REMOTE LOCATOR.
PRESS MUTETH&l
PAUSE KDf
TO CHANGE CODE FROM 4
TO END PRESS EXIT
if another remote control beeps
Press the MUTE button, then the PAUSE/STILL button.
/^OUK
REMOTE LOCATOR
CODE IS 4
PRESS ANY DIGIT
TO CHW^GE CODE
\^0 END PRESS EXIT
J
Press a Number button (0 - 9) to enter a single digit code for
your remote control. Your remote control will beep briefly.
YOUR REMOTE LOCATOR
CODE HAS BEEN CHANGED
NEW CODE IS 3
TO END PRESS EXIT
Press the STATUS/EXIT button to exit.