Philips CCX134AT - Manual (Page 21)

Setting
the Remote to
Operate a Cable Box/Di^l Satellite System (cant’d) 21
Within 30 seconds after releasing the CABLE/DSS button, use the
Number buttons to enter the two-digit code for your
Cable Box or Satellite System. For example, if you have a
Zenith Cable Box, press Number buttons 1,3,
a
Try step 1 again. If the remote control works your Cable Box
or Satellite System, you’re finished. If the remote control still does­
n’t work your Cable Box or Satellite System, repeat steps 2 - 5 ,
using a different code.
hM| I 0 I 1*^1
Mcci
o o o o
o o ® ©
ocw,. vAimew
O l © ©
o
There is no guarantee
that the remote control
will work your Cable
Box or Satellite System.
Helpfui Hints
• Although the remote control that
comes with yourTV/VCR will work
most Cable Boxes and Satellite
Systems, it is possible that the
remote control will not operate your
Cable Box or Satellite System.
" The remote control may only oper­
ate some features of your Cable
Box or Satellite System. For exam­
ple, some Cable Boxes may only be
turned on at the Cable Box, there­
fore the remote control will not be
able to turn on the Cable Box.
" If you can not change the channels
at the Cable Box by using the
Number buttons, press the
CABLE/DSS button before you press
the Number buttons. It may change
channels at the Cable Box.
• If you bad to
progrom the
remote
control to operate your Cable Box or
Satellite
System here, whenever you
replace the batteries in the remote
conttoi, you will have to program the
remote control again.