Philips CCX134AT - Manual (Page 51)

Real Time Counter Memory 51
Follow the steps below to reset the real time counter to zero at
a tape location you want to refer to later.
Press the COMBI button» then play» fast forward or rewind
a tape to the location that you would like to refer to later.
Stop the tape.
Press the STATUS/EXIT button. The real time counter will
appear on-screen.
/oir03 PM
^ CHtO STOp\
^LP l;23:-15
J
While the counter remains on-screen» press the CLEAR
button to reset the real time counter to zero.
f
A
i 0:00:00
41
While the counter remains on-screen, press the MEMORY
button so that M appears on-screen. To erase a time counter
memory, press the MEMORY button so that the M disappears
from the screen.
L
M 0:00:00 ^
To return to the previous point at which the real time
counter was reset to zero» when in Stop mode» press the
Rewind/Search/- button.To return to the future point at
which the time counter was reset to zero, when in Stop
mode, press the Fast Forward/Search/+ button. Wait for
the tape to stop, then press the Play/A button to watch
the tape.
Helpful Hints
“ The time counter memory will not
function during Repeat Play mode.
Details are on page 50.
“ You may only set one time counter
memory at a time. If you try
to set
the time counter to zero at a sec­
ond location, the previous time
counter to zero setting will be lost