Philips CCX134AT - Manual (Page 36)

36
Timer Recording
Follow the steps below to program theTVA^CR to record TV pro­
grams while you’re away from home,You can program up to eight
timer recordings. For each one.theTV/VCR will turn itself on,
record, and turn itself off automatically. Before you begin make
sure:
o The clock has been set. If not, CLOCK MUST BE SET appears,
o Channels are programmed.
o There Is a tape in theTV/VCR (make sure the tape’s record tab
is intact and the tape is long enough to record the program).
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step I.
Press the COMBI button, then the MENU button to dis­
play the pop up menu.
PRIM. SETUP
► VCR PROGRAM
VCRSETUP
CAPTION
REMINDER
BRIGHTNESS
PRESS + I
Press the Play/A button or the Stop/T button to select
VCR PROGRAM, then press the Fast Forward/Search/+
button.
VCRPROGRAM
1 ONCE
2 DAILY (MON - FRI)
3 WEEKLY
4 PROGRAM REVIEW
TO SELECT PRESS NUMBER
TO END PRESS EXIT
Select a once, daily or weekly recording.
o Press the Number 1 button to select ONCE. TheTV/VCR will
record a TV program on any day you choose, up to 12 months
away.
o Press the Number 2 button to select DAILY. TheTV/VCR will
record the same channel from Monday through Friday - starting
at the same time and recording for the same length of time
every day.
o Press the Number 3 button to select WEEKLY.TheTV/VCR will
record the same channel on the same day, at the same time, and
for die same length of time every week.
Hef|>fu/ Hints
• If the pov/er faifs, programmed
timer recordings will be lost Setting
the dock wi/1 restore the timer
recording.
“ You cannot set a timer recording if
the TV/VCR is in Record De/eot
mode. To set the Record Defeat
mode to OFF, see page
44.