Rerecording (tape duplication) 35 – Philips CCX134AT User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Rerecording (Tape Duplication) 35
Source Unit
(VCR or Camcorder)
W a
ili
AUDIO and
VIDEO OUT
Jacks
From AUDIO OUT to AUDIO (In)
mo
CJCD
AUDIO and
VIDEO (In) Jacb
onTV>VCR
From VIDEO OUT to VIDEO (In)
Make the connections shown above, using audio and video
cables.
The source unît (VCR or camcorder) will play your tape. Insert a
prerecorded tape in the source unit. If playback begins, press
the STOP button on the unit
TheTV/VCR will record your tape. Press the COMBI button,
then insert a blank tape in the TV/VCR. Make sure the tape’s
record tab is intactThe"h/A/CR will turn on automatically.
4
Point the remote control at the TV/VCR. Press Number
buttons 0,0 so thatA/V IN appears on-screen.
Point the remote control at the TV/VCR. Press the (Tape)
SPEED button until the desired tape speed (SP, LP, or
5LP) appears on-screen.
a
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
To stop copying, press the STOP/EJECT button on the
TV/VCR, then stop the tape on the source unit (VCR or
camcorder).
Heipful Hints
Unauthorized recording of copy
righted television
progroms,
video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright Jaws.
Different brands of equipment may
operate difj^rently.
Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
Audio
and video
cables are not
included.