FingerTec TCMS V2 - Manual (Page 11)

11
Chapter 2
Connecting Terminals to TCMS V2
This chapter guides you on the basic connection and activation of FingerTec ter-
minals in the TCMS V2
Get ready with your timeclock terminal’s IP address and serial number before you pro-
ceed with this chapter. The product key that you have keyed in during installation will
appear in the
FingerTec Terminal window. There are several ways to connect to Fin-
gerTec terminals, including TCP/IP, USB and Serial Port (RS485 or RS232). Choose your
connection method and let’s start.
Activating Terminal in TCMS V2
Activating Terminal in TCMSV2 for the first time via TCP/IP
1. Choosing the Terminal Model
The terminal of which its Product Key is being used to install the TCMS V2 will appear
on the first line in the “FingerTec Terminal” window.
Choose the model of the terminal. Please go to product.fingertec.com to find out more
about FingerTec products.
2. Choosing Connection Type
To connect your timeclock terminal via TCP/IP, make sure that you have connected
the terminal with the computer installed with TCMS V2 using a CAT5 cable. Once the
cable is connected, you can start activating your terminal.
3. Specifying IP Address in the Terminal
Click on IP Address and specify the IP address for your timeclock terminal. The default
IP address is 192.168.1.201.
4. Uncheck the Disabled Button
There is a checker labeled Disabled on the far right of the FingerTec Terminal window.
Uncheck the Disabled button for the system to start connecting to the terminal.
Once the checker is disabled, the system reads the IP address and displays the correct
serial number of the terminal.
5. Terminal activation
A. Online Activation (requires Internet access)
Now you will be prompted with a pop-up window requiring an Activation Key. Select
“I want to generate the Activation key online with these details” and click Apply. Wait
for a moment for the server to be connected and then click Apply to fill up the Activa-
tion key automatically.
B. Offline Activation (no Internet access required)
In case you do not have Internet connection, contact your local reseller or support@
fingertec.com to request for an activation key. Please provide the serial number and
product model so that we can generate a corresponding activation key.