EVCO EVCSR338J9 - Manual (Page 31)

EVCO S.p.A. Vcolor 338 S | Installer manual ver. 1.2 | Code 144VC338SE124
page 31 of 50
13 OTHER FUNCTIONS
13.1 Display of the alarms status
Operate as follows to access the procedure:
1. Ensure that the device is switched on and that no
other procedure is in progress.
2. Touch .
3. Touch to select “LIST OF ALARMS”.
4. Touch the middle of the display.
5. Touch or .
Operate as follows to exit the procedure:
6. Touch .
13.2 Display of the process variables
value and of the machine status
Operate as follows to access the procedure:
1. Ensure that the device is switched on and that no
other procedure is in progress.
2. Touch .
3. Touch to select “INTERNAL VALUES”.
4. Touch the middle of the display.
5. Touch or .
Operate as follows to exit the procedure:
6. Touch .
13.3 Setting the language used for
the screens
Operate as follows to access the procedure:
1. Ensure that the device is switched on and that no
other procedure is in progress.
2. Touch .
3. Touch to select “LANGUAGES” to select the
language.
4. Touch the middle of the display.
5. Touch the middle of the display again.
Operate as follows to exit the procedure:
6. Touch .