EVCO EVCSR338J9 - Manual (Page 28)

EVCO S.p.A. Vcolor 338 S | Installer manual ver. 1.2 | Code 144VC338SE124
page 28 of 50
11 “FAVOURITE CYCLES”
FUNCTION
11.1 Preliminary notes
The “Favourite cycles” function allows to start one of the last
10 work cycles performed.
One of the following types of work cycle can be started:
- cooking cycles set with the procedure illustrated in
the paragraph 8.2 “Setting the cooking cycle” (in
this case, the last cycle performed can be started)
- recipes from the “my recipes” function
- “Special cycles” function work cycles.
11.2 Starting a favourite cycle
Operate as follows to start a favourite cycle:
1. Ensure that the device is switched on and that no
other procedure is in progress.
2. Touch .
3. Touch or to select the favourite cycle.
4. Touch the middle of the display.
5. Touch the middle of the display again.
6. Touch : the favourite cycle will be
started.
Access to a favourite cycle.
Starting a favourite cycle.