EVCO EVCSR338J9 - Manual (Page 30)

EVCO S.p.A. Vcolor 338 S | Installer manual ver. 1.2 | Code 144VC338SE124
page 30 of 50
12.3 Enabling the "Weekly
programmed switch-on"
function
Operate as follows to access the procedure:
1. Ensure that at least one switch-on is set, that the
device is on and that no other procedure is in
progress.
2. Touch for 1 s.
Operate as follows to select a switch-on:
3. Touch or .
Operate as follows to modify a switch-on:
4. Repeat the 3 points... 11. of the paragraph 12.2
“Setting the "weekly programmed switch-on"
function”.
Operate as follows to activate the function:
5. Touch .
Operate as follows to deactivate the function:
6. Touch before point 4.
Access to the function activation procedure
“Weekly programmed switch-on”.
Selection of a switch-on and activation of the function
“Weekly programmed switch-on”.