EVCO EVCSR338J9 - Manual (Page 29)

EVCO S.p.A. Vcolor 338 S | Installer manual ver. 1.2 | Code 144VC338SE124
page 29 of 50
12 "WEEKLY PROGRAMMED
SWITCH-ON" FUNCTION
12.1 Preliminary notes
The “Weekly programmed switch-on” function allows to
programme up to a maximum of 9 weekly switch-ons of the
device and simultaneously start a recipe; see chapter 9 ““MY
RECIPES” FUNCTION”.
12.2 Setting the "weekly
programmed switch-on"
function
Operate as follows to access the procedure:
1. Ensure that at least one recipe is memorised, that
the device is on and that no other procedure is in
progress.
2. Touch .
Operate as follows to set the switch-on day:
3. Touch .
4. Touch or within 15 s.
5. Touch the middle of the display.
Operate as follows to set the switch-on time:
6. Touch .
7. To set the time, touch or within 15 s.
8. To set the minutes, touch the display in proximity
of the centre, then touch or within 15 s.
9. Touch the middle of the display.
Operate as follows to set the recipe to start-up:
10. Touch .
11. Repeat the 3 points... 5. of paragraph 9.3
“Starting a recipe”.
Operate as follows to programme another switch-on:
12. Touch .
13. Repeat the 3 points... 11.
Operate as follows to select a switch-on:
14. Touch or .
Operate as follows to eliminate a switch-on:
15. Select the switch-on.
16. Touch for 1 s.
Operate as follows to exit the procedure:
17. Touch .
Access to the setting procedure of the
“Weekly programmed switch-on” function.
Setting the switch-on time.
Exit from the setting procedure of the
“Weekly programmed switch-on” function.